Industrial Applications

Stainless and Aluminum Surface protection Films (Vinyl)
 

🛡️ Industrial Metal Surface Protection Solutions

Protecting the "money side" of your metal is critical. Whether you are dealing with a mirror-finish stainless sheet or a rugged aluminum diamond plate, these films prevent costly rework by shielding surfaces from scratches, abrasions, and environmental contaminants during fabrication and transit.

​

​

Quick Reference Comparison

​

1. Pregis PolyMask | 25CV825X (Black & white)

The Fabricator's Workhorse

This 2.5 mil high-performance film is designed for versatility. The "CV" designation indicates a high-elongation carrier film that stretches without breaking, making it ideal for parts that require bending or roll forming after the film is applied.

• Primary Application: Unpainted Stainless Steel and Aluminum sheet.

• Key Feature: UV inhibitor for outdoor sun exposure

• Adhesion: Formulated with a medium-tack acrylic adhesive that ensures the film stays put during mechanical handling but peels cleanly without "ghosting."

2. POLIFILM | 2520 (Black & White)

The Outdoor & Storage Specialist

POLIFILM 2520 is a co-extruded film featuring a white top layer and a black adhesive-side layer. This combination is the industry standard for preventing "sun-baking," where heat causes adhesive to fuse to the metal.

• Primary Application: Long-term storage of mill-finish aluminum and stainless steel.

• UV Protection: Integrated 6-month UV resistance, making it perfect for materials stored in outdoor yards or job sites.

• Thermal Control: The white surface reflects solar radiation to keep the metal cool, while the black layer provides 100% opacity for maximum surface stability.

3. POLIFILM | 3020 (Clear or Blue)

Heavy-Duty & Textured Surface Protection

When dealing with Diamond Tread Plate or rougher mill finishes, a standard film often "tunnels" or punctures. POLIFILM 3020 is a 3.0 mil heavy-duty clear film built to handle the physical demands of textured metals.

• Primary Application: Aluminum Diamond Plate, 5-bar tread, and embossed metals.

• Puncture Resistance: The 3.0 mil thickness provides a significant buffer against tool marks and the sharp points of tread patterns.

• Superior Wet-Out: Designed to conform into the recesses of textured metal, ensuring 100% surface coverage and preventing moisture from getting trapped under the film.

💡 Application & Removal Tips

• Surface Prep: Ensure the metal is free of processing oils and moisture before application.

• Avoid Over-Tension: Do not over-stretch the film during application, as it may "rebound" and lift at the edges.

• Removal Angle: For the cleanest release, peel the film back at a 90° angle at a moderate, steady speed.